RESEARCH OF THE STRESS-STRAIN STATE OF THE GAS DISTRIBUTION MECHANISM DESIGN ELEMENTS USING THE DEVELOPED 3D MODELS

Authors

Abstract

The necessity of maintaining the existing fleet of rolling stock in a reliable and efficient condition is substantiated due to the implementation of experimental and calculation studies of the units and parts of the mechanical system of locomotives. In the mechanical system of the locomotive, as one of the most important, the cam mechanism of the gas distribution of the locomotive power plant is allocated, which is responsible for regulating the operation of the entire mechanical system.

The aim of the research, which consists in describing the stress-strain state of the elements of the design of the gas distribution mechanism, is singled out.

The expediency of carrying out experimental studies using the developed 3D models of the design elements of the mechanism of the gas distribution of transport diesels is substantiated. The economic feasibility of the proposed approach for carrying out experimental studies using modern software is noted. This approach does not require special techniques, measuring and recording equipment.

A fragment of the geometric 3D model of the exhaust valve drive is presented and the corresponding structural elements, among which are cams, a roller, a pusher, a bar, a traverse and valves are selected. As the most compliant element, the rod of the gas distribution mechanism of the internal combustion engine was chosen.

The results of the study of a simplified geometric model of the rod, conducted using modern software, as well as the parameters of the research and grid parameters, are presented.

The elaborated refined 3D model of the rod is presented, which most corresponds to the real design, as well as the results of investigation of its stress-strain state in the form of linear strains and normal stresses.

The expediency of using refined geometric models as those that most correspond to experimental data is substantiated.

The recommendations on the use of the developed models in the assessment and refinement of the laws of motion of links in the mechanical system of power plants of locomotives are given.

Keywords: diesel engine, valve actuator, a geometric model.

Author Biographies

, Ukrainian State University of Railway Transport

доктор технічних наук, професор

, Ukrainian State University of Railway Transport

кандидат технічних наук, доцент

References

Література

Державна програма оновлення рухомого складу на 2017-2021 роки. [Текст] Затверджена на засіданні ПАТ Укрзалізниці від 29 листопада 2016 р.

Братченко, О.В. Блочно-ієрархічне описання конструкції сучасних тепловозів [Текст] / О.В. Братченко // Збірник наукових праць Української державної академії залізничного транспорту. – Харків: УкрДАЗТ, 2010 – Вип. 119. – С. 136-141.

Тіщенко, В.С. Новий підхід до розрахункових досліджень механізмів локомотивної енергетичної установки з V-подібним дизелем. [Текст] / В.С. Тіщенко // Зб. наук. праць. – Харків: УкрДАЗТ, 2010. – Вип. 86. – С. 122 – 128.

Тепловозные дизели Д49 [Текст] / Е.А. Никитин, В.М. Ширяев и др. – М.: Транспорт, 1982. – 255 с.

Мороз, В.І. Особливості побудови геометричних моделей елементів модулів підсистеми розподільного вала тепловозного дизеля Д49. [Текст] / В.І. Мороз, О.В. Братченко, В.С. Тіщенко // Зб. наук. праць. – Харків: УкрДУЗТ, 2016. – Вип. 160. – С. 128 – 134.

Мороз, В.І. Геометрична модель механізму приводу клапанів тепловозного дизеля Д49. [Текст] / В.І. Мороз, О.В. Братченко, В.С. Тіщенко // Зб. наук. праць. – Харків: УкрДУЗТ, 2016. – Вип. 166. – С. 30 – 38.

Астахова, К.В. Удосконалення технології проектування і ремонту розподільних валів енергетичних установок тепловозів [Текст]: автореф. дис. … канд.. тех.. наук: 05.22.07. / К.В. Астахова. - Дніпропетровськ, 2012. - 20с.

Тику, Ш. Эффективная работа : SolidWorks 2004. [Текст] / Ш. Тику — СПб.: Питер, 2005. — 768 с.

Володин, А.И. Локомотивные двигатели внутреннего сгорания. [Текст] / А.И. Володин. - М.: Транспорт, 1990. – 256 с.

Володин, Л.И. Локомотивные энергетические установки [Текст]: учебник для вузов ж.-д. трансп. / Л.И. Володин, В.З. Зюбанов, В.Д.Кузьмич и др.; под ред. А.И. Володина. - М.; ИПК «Желдориздат», 2002. —718 с.

Собенин, Л.А. Устройство и ремонт тепловозов [Текст]: учебник для нач. проф. образования / Л.А.Собенин, В.И.Бахолдин, О.В.Зинченко, А. А. Воробьев. — М.: Издательский центр «Академия», 2004. — 416 с.

References

State program for the renewal of rolling stock for 2017-2021. (2016) Approved at the meeting of PJSC Ukrzaliznytsia of November 29.

Bratchenko, A.V. (2010) Block-hierarchical description of the construction of modern diesel locomotives. Collection of scientific works of the Ukrainian State Academy of Railway Transport, 119, 136-141.

Tishchenko, V.S. (2010) A new approach to the computational studies of the mechanisms of a locomotive power plant with a V-shaped diesel engine. Sb. sciences. Works, 86, 122 - 128.

Nikitin, E.A., Shiryaev, V.M. and others (1982) Diesel locomotives D49. M.: Transport, 255.

Moroz, VI, Bratchenko, AV, Tishchenko, VS (2016) Features of construction of geometrical models of elements of modules of a subsystem of a camshaft of diesel diesel engine Д49. Sat. sciences. Works, 160, 128 - 134.

Moroz, VI, Bratchenko, AV, Tishchenko, VS (2016) Geometrical model of the drive mechanism of diesel locomotive diesel valves D49. Sat. sciences. Works, 166, 30 - 38.

Astakhova, K.V. (2012) Improving the technology of designing and repairing the distribution shafts of diesel locomotive power plants: Author's abstract. dis. ... Candidate. Tech .Sciences: 05.22.07. Dnepropetrovsk, 20.

Tiku, Sh. (2005) Effective work: SolidWorks 2004. St. Petersburg: Peter, 768.

Volodin, A.I. (1990) Locomotive internal combustion engines. M.: Transport, 256.

Volodin, L.I., Zyubanov, V.Z., Kuzmich, VD and others (2002) Locomotive power plants: textbook for high schools. transp. M.; IPK "Zheldorizdat", 718.

Sobenin, L.A., Bakholdin, V. I., Zinchenko, OV, Vorobiev, A. A. (2004) The device and repair of diesel locomotives: a textbook for the beginning. prof. education. M.: Publishing Center "Academy", 416.

Published

2018-07-27

How to Cite

, & . (2018). RESEARCH OF THE STRESS-STRAIN STATE OF THE GAS DISTRIBUTION MECHANISM DESIGN ELEMENTS USING THE DEVELOPED 3D MODELS. Municipal Economy of Cities, (142), 68–71. Retrieved from https://khg.kname.edu.ua/index.php/khg/article/view/5185