TO DETERMINE THE FUNCTIONS OF SENSITIVITY OF THE PRESS-THREADED JOINT

Authors

  • O.M. Beketov National University of Urban Economy in Kharkov

Abstract

The problem of determining the sensitivity functions of the dynamic parameters of nodes in relation to the parameters of the state is investigated. The given algorithm of determination of frequencies and amplitudes of resonant oscillations with the subsequent numerical solution of diagnostic equations with respect to state parameters.

The coefficients that determine the matrix of the sensitivity of the connection are determined. The relative error of the parameters and the mean square deviation of the state parameters from the actual value are determined. The conclusion about the possibility and expediency of using the methodology in practice is made.

If at the tests of object it is possible to measure both the parameters of oscillation signal and power parameters of connections, the functions of sensitiveness can be determined exceptionally an experimental method.

The use of method of the forced vibrations is limited by exactness of raising of diagnosis about the state of connections as a result of subjective errors. The task of determination of the state of connections is very difficult every sub-group of connections needs development of individual methods of control and separate consideration. It is negatively represented at the test of high exactness equipment, for which the probed knots own a small sensitiveness relatively dynamic parameters to the change of power parameters. Application of automatic facilities allows substantially to promote stability of measuring of dynamic parameters of connections.

A method which targets at the estimation of the state of immobile contact connections is considered in materials of the article: efforts of onpressing ring on the axis of rotor inhaling of spiral connection. The autoswaying method of excitation of mechanical vibrations owns firmness in-process and selectivity, that by an automatic output on the permanent mode in the set frequency range. It provides enhanceable stability of results of measurings.

 

Keywords: construction, press-threaded connection, dynamic parameters, structural model, deformation, frequency and amplitude of oscillations, sensitivity of dynamic parameters, algorithm, sensitivity matrix, method.

Author Biography

, O.M. Beketov National University of Urban Economy in Kharkov

кандидат технічних наук, доцент, професор кафедри

References

Література

Актуальные вопросы автоматизации вибро-диагностики машин с помощью ЭЦВМ [Текст] / С.А. Добрынин. – В кн. Динамические методы испытаний и диагностирования машин-автоматов и автоматических линий. – М.: 1981. - С. 111-116.

Лусь, В.І. До визначення коефіцієнта чутливості власного спектру частот пресо-різьбового з’єднання. [Текст] / В.І. Лусь // Комунальне господарство міст. Науково-технічний збірник. Випуск 128, серія: Технічні науки та архітектура. –Харків: 2016. - С.10-14.

Исследование вибрации упругих систем ротор-корпус с помощью ЭВМ [Текст] / В.О. Бауэр // Машиноведение. – 1980. - № 3. - С. 11-14.

Об одном методе определения собственных спектров составных упругих систем [Текст] / В.Л. Вейц, А.Е. Кочура // Прикладная механика. – 1978. – т.XIV. - № 7. - С. 88-96.

Синхронизация начальных фаз и установка частоты в системе воспроизведения пространственных вибраций [Текст] / А.Е. Божко, В.П. Шпачук // Прикладная механика. – 1980. - т. XIV. - № 3. - С. 109-114.

Лусь, В.И. К определению коэффициентов продольной жесткости резьбовых соединений, используемых в строительстве. [Текст] / В.И. Лусь // Комунальне господарство міст. Науково-технічний збірник. Випуск 105, серія: Технічні науки та архітектура.

– Харків: 2012. - С.441-446.

Лусь, В.И. К определению коэффициентов поперечной жесткости резьбового соединения в строительных конструкциях. [Текст] / В.И. Лусь // Комунальне господарство міст. Науково-технічний збірник. Випуск 110, серія: Технічні науки та архітектура.

– Харків: 2013. - С.28-33.

Круг, Г.К. Планирование эксперимента в задачах классификации и интерполяции. [Текст] / Г.К. Круг, Ю.А. Сосулин, В.А. Фатуев – М.: Наука, 1977. - 208 с.

References

Dobrynin, S.A. (1981) Pressing questions of automation of vibrodiagnostics of machines by РС. Dynamic methods of tests and diagnosticating of machines-automats and automatic transfer lines. M.: 111-116.

Lus', V.I. (2016) To determine the sensitivity coefficient own frequency spectrum press threaded connection. Utilities city. Scientific and technical collection. Issue 128 Series: Engineering and Architecture. Kharkov: 10-14.

Bauer, V.O. (1980) Research of vibration of the resilient systems rotor-corps by РС. it is engineering Science, 3, 11-14.

Veyc, V.L., & Kochura, A.E. (1978) About one method of determination of own spectrums of component resilient system. Applied mechanics, XIV(7), 88-96.

Bozhko, A.E., & Shpachuk, V.P. (1980) Synchronization of initial phases and setting of frequency is in the system of reproducing of spatial vibrations. Applied mechanics, XIV(3), 109-114.

Lus', V.I.(2012) Determination of the coefficients of longitudinal stiffness of threaded connections used in construction. Utilities city. Scientific and technical collection. Issue 105 Series: Engineering and Architecture. Kharkov: 441-446.

Lus', V.I. (2013) To determine the coefficients of transverse stiffness of a threaded joint in building structures. Utilities city. Scientific and technical collection. Issue 110 Series: Engineering and Architecture. Kharkov: 28-33.

Krug, G.K., Sosulin, U.А., & Fatuev, V.A. (1977) Planning of experiment in the tasks of classification and interpolation. M.: Science, 208.

Published

2018-07-27

How to Cite

(2018). TO DETERMINE THE FUNCTIONS OF SENSITIVITY OF THE PRESS-THREADED JOINT. Municipal Economy of Cities, (142), 243–247. Retrieved from https://khg.kname.edu.ua/index.php/khg/article/view/5212