RESEARCH ON STRENGTN OF STRESS-STRAIN STATE STEEL-CONCRETE ON ACRYLIC GLUTES.

Authors

Abstract

In the article the purpose and tasks of studies of strength of steel-concrete steel-concrete compounds on acrylic adhesives are considered, their relevance is shown. In practice, the construction of a non-concrete method of fastening of technological equipment, engineering communications and structures has become widespread. Fastening in this way is carried out by gluing to the surface of the concrete fastening units and supporting parts of equipment or structures, as well as engineering communications. To this end, widely used acrylic adhesives. Experimental studies of the strength of this connection, as well as its implementation in the practice of construction production, indicate a decline in the construction of buildings and structures, reducing the material intensity and the complexity of work. Most theories of deformation and destruction of glue compounds steel-concrete in the first stage, before the appearance of micro-destruction, are considered, as a rule, only elastic deformation. Models based on theories of plasticity, can not describe many features of deformation of glue compounds. The bearing ability of the connection of steel-concrete is determined by the strength of the concrete, the structural features of the mounting of the site, as well as the magnitude of the stress concentration on the contact adhesive-concrete. The method of conducting calculations is described, which allows to determine the stresses and movement of contacts on steel-glue and glue-concrete. Recommendations on rational introduction into the practice of building of a non-concrete method of fastening are given. This allows us to reduce the material capacity and the laboriousness of the works.Keywords: stress-deformed state, strength, elasticity, asymmetric problem, multilayer system, acrylic adhesives, compound steel-concrete

Author Biographies

, O. M. Beketov National University named after, Kharkiv

кандидат технічних наук,доцент

, O. M. Beketov National University named after, Kharkiv

кандидат технічних наук,доцент

References

Література

Золотов, С.М. Инновационные материалы на основе акриловых полимеров для восстановления и ремонта конструкций объектов строительства и транспорта [Текст] / С.М. Золотов // Инновационные технологии диагностики, ремонта и восстановления объектов строительства и транспорта: Сб. науч. тр. - Вып. 30. – Днепропетровск: ПГАСА, 2004. – С. 192-196.

Shutenko, L., Zolotov, M., Zolotov, S. (2006) Compositions on the basis of acrylic polymers for repairing cement-concrete pavements and reinforced concrete bridge structures. Proceedings of the 1st Polish Road Congress, 443-450.

Шутенко, Л.Н. Прочность и напряженно-деформированное состояние соединения сталь-бетон на акриловых клеях [Текст] / Л.Н. Шутенко, М.С. Золотов, В.Ю. Щербов // Материалы II международной научно-технической конференции «Строительство, реконструкция и восстановление зданий городского хозяйства». – Харьков: ХНАГХ, 2007. – С. 109-113.

Щербов, В.Ю. Расчет и зависимость напряженно-деформированного состояния соединения сталь-бетон на акриловых клеях от ряда факторов [Текст] / В.Ю. Щербов // Материалы VIII международной научно-технической интернет-конференции «Применение пластмасс в строительстве и городском хозяйстве». – Харьков: ХНАГХ, 2008. – С. 63-65.

Шутенко, Л.Н. Определение напряжений и перемещений на контактах клеевого соединения сталь-бетон [Текст] / Л.Н. Шутенко, М.С. Золотов, В.Ю. Щербов // Материалы к 46-му международному семинару по моделированию и оптимизации композитов МОК’46. – Одесса, ОГАСА, 2007. – С. 211-212.

Золотова, Н.М. Влияние технологических факторов и вида нагружения на прочность соединения бетонных элементов акриловыми клеями [Текст] / Н.М. Золотова, А.О. Гарбуз, В.А. Скляров // Збірник праць Полтавського національного технічного університету ім. Ю. Кондратюка. Сер. Галузеве машинобудування, будівництво №4 (1) -2013, стор. 114-122.

Чупрынин, А.А. Ползучесть и долговечность железобетонных элементов конструкций [Текст] / А.А.Чупрынин, Н.В.Середа // Комунальне господарство міст. Серія: Технічні науки та архітектура.-Харків:ХНУМГ ім..О.М.Бекетова, 2017.-№135.-С.2 -6.

Чупринін, О.О. Повзучість та довговічность залізобетонних циліндричних панелей [Текст] / О.О.Чупрінин, Н.В.Середа //Комунальне господарство міст. Серія: Технічні науки та архітектура.-Харків:ХНУМГ ім..О.М.Бекетова,2017.-№139.-С.183-187.

Shpachuk, V.P. (2016) Effect of mutually amplifying action two coordinate shock loading in problems of dynamics of knots of machines. Scientific Bulletin of National Mining University. Scientific and technical journal, 6 (156), 89-94.

Shpachuk, V., Dudko, V., Kostenko, I. (2016) Ergonomic aspects of test objects of the spatial structure on the vibration reliability. Municipal economy of cities, 130, 2-7.

References

Zolotov, S.M. (2004) Innovative materials based on acrylic polymers for restoration and repair of constructions of con-struction and transport facilities. Innovative technologies for diagnostics, repair and restoration of construction and trans-portation facilities: Sat. sci. tr., 30, 192-196.

Shutenko, L., Zolotov, M., Zolotov, S. (2006) Compositions on the basis of acrylic polymers for repairing cement-concrete pavements and reinforced concrete bridge structures. Proceedings of the 1st Polish Road Congress, 443-450.

Shutenko, LN, Zolotov, MS, Shcherbov, V.Yu. (2007) Strength and stress-strain state of the steel-concrete compound on acrylic adhesives. Proceedings of the II International Sci-entific and Technical Conference "Construction, Reconstruction and Restoration of Urban Economy", 109-113.

Scherbov, V.Yu. (2008) Calculation and dependence of the stress-strain state of the steel-concrete compound on acrylic adhesives on a number of factors. Proceedings of the VIII International Scientific and Technical Internet Conference "Application of Plastics in Construction and Urban Manage-ment", 63-65.

Shutenko, LN, Zolotov, MS, Shcherbov, V.Yu. (2007) De-termination of stresses and displacements at the contacts of the glue joint steel-concrete. Materials to the 46th international seminar on modeling and optimization of composites MOK'46, 211-212.

Zolotova, NM, Garbuz, AO, Sklyarov, V.A. (2013) Influ-ence of technological factors and the type of loading on the strength of the jointing of concrete elements with acrylic adhe-sives. Collection of works of Poltava National Technical Uni-versity named after. Y. Kondratyuk Sir Sectoral engineering, construction, 4(1), 114-122.

Chuprinin, AA, Sereda, NV. (2017) Creep and durability of reinforced concrete structural elements. Municipal economy of cities. Series: Technical Sciences and Architecture, 135, 2 – 6.

Chuprinin, O., Sereda, N.V. (2017) Creep and durability of reinforced concrete cylindrical panels. Municipal economy of cities, Series: Technical Sciences and Architecture, 139, 183-187.

Shpachuk, V.P. (2016) Effect of mutually amplifying action two coordinate shock loading in problems of dynamics of knots of machines. Scientific Bulletin of National Mining University. Scientific and technical journal, 6 (156), 89-94.

Shpachuk, V., Dudko, V., Kostenko, I. (2016) Ergonomic aspects of test objects of the spatial structure on the vibration reliability. Municipal economy of cities, 130, 2-7.

Published

2018-07-27

How to Cite

, , & . (2018). RESEARCH ON STRENGTN OF STRESS-STRAIN STATE STEEL-CONCRETE ON ACRYLIC GLUTES. Municipal Economy of Cities, (142), 256–260. Retrieved from https://khg.kname.edu.ua/index.php/khg/article/view/5215

Most read articles by the same author(s)