MODELING AND PREVENTION OF CORROSION IN LOAD-BEARING ELEMENTS OF FREIGHT CARS
DOI:
https://doi.org/10.33042/2522-1809-2025-3-191-597-605Keywords:
transport, mechanics, rolling stock, freight cars, automation, computer modeling, corrosion, kingpin beamAbstract
The relevance of the research is primarily due to the aggressive impact of the environment in which freight cars are operated.
The results of corrosion modeling are the basis for the development of new standards and regulations in the railcar industry aimed at ensuring the safe operation of rolling stock.
References
Zhao Y., Xu С., Zhang J.W., Qiu Z.H., Wang L., Hu J.M., Lin C.G., Coatings embedded with composite defective metal organic frameworks having excellent mechanical and anti-corrosion properties, Journal of Materials Science & Technology, Volume 234, 2025, 217-229 p.,
https://doi.org/10.1016/j.jmst.2025.01.057
Iranpour M., Babaei A., Bagherzadeh M., Microwave and heat-assisted extracted Melilotus officinalis as a potential eco-friendly corrosion inhibitor for carbon steel in 0.5 M HCl solution, Cleaner Chemical Engineering, Volume 11, 2025, 100149,https://doi.org/10.1016/j.clce.2025.100149. (https://www.sciencedirect.com/science/article/pii/S277278232500004X)
Hongxia L., Mengyi Zhao M., Ziwen L., Zhaoyuan L., Zhenhua Z., Xiaolian L., Zhen S., Erpan Z., Huawei R., Rongzhi Z., Xuefeng Z., Enhanced corrosion resistance and high-frequency performance of FeSiAl soft magnetic composites via an ultrahydrophobic surface insulation approach, Journal of Materials Science & Technology, Volume 232, 2025, 257-266 р., ISSN 1005-0302, https://doi.org/10.1016/j.jmst.2025.02.018. (https://www.sciencedirect.com/science/article/pii/S100503022500204X)
Тимофеєва, Л., Мартинов, І., Воскобойников, Д. і Грибанов, М. Дослідження впливу корозійно-активних речовин на руйнування елементів конструкції вагонів», Науковий журнал «Інженерія природокористування» ,2020, №(2(20), 95-100 с. doi: 10.5281/zenodo.7263722.
Zhang J.Y., Yao Z.F., Zhou Y.H., Luan J.H., Liu X.J., Sun Z.Y., Nan H., Zhao Y.L., Yang T., Superior corrosion resistance and its origins in an additively manufactured Co-Cr-Ni-Al-Ti high-entropy alloy with nano-lamellar precipitates, Journal of Materials Science & Technology, Volume 231, 2025, 164-179 р., ISSN 1005-0302, https://doi.org/10.1016/j.jmst.2024.12.072. (https://www.sciencedirect.com/science/article/pii/S1005030225001537)
Muqiu Xia, Li Lai, Mengyu Fu, Yuxin Wu, Shiqiang Chen, Guangzhou Liu, Electrodeposition of antibacterial, anti-corrosion copper nanopillars arrays with heat conductive properties for marine environments, Journal of Materials Science & Technology, Volume 232, 2025, 89-102 р. , ISSN 1005-0302, https://doi.org/10.1016/j.jmst.2024.12.087. (https://www.sciencedirect.com/science/article/pii/S1005030225001896)
Fomin, O., Sulym, A., Kulbovskyi, I., Khozia, P., & Ishchenko, V. (2018). Determining rational parameters of the capacitive energy storage system for the underground railway rolling stock. Eastern-European Journal of Enterprise Technologies, 2(1 (92), 63–71 р. https://doi.org/10.15587/1729-4061.2018.126080
Gorobchenko O., Fomin O., Gritsuk I., Saravas V., Grytsuk Y., Bulgakov M., Volodarets M. and Zinchenko D. Intelligent Locomotive Decision Support System Structure Development and Operation Quality Assessment. IEEE 3rd International Conference on Intelligent Energy and Power Systems (IEPS). Kharkiv, Ukraine. 2018. 239-243 р. doi:10.1109/IEPS.2018.8559487
Сапронова С. Ю., Буліч Д. І., Ткаченко В. П. , Продовження терміну експлуатації вантажних вагонів, Вісник Східноукраїнського національного університету імені Володимира Даля. 2017. № 3. 179-182 с.
Rezvani M.A., Mazraeh A.Н, ( 2017) Dynamics and stability analysis of a freight wagon subjective to the railway track and wheelset operational conditions, European Journal of Mechanics - A/Solids, Volume 61, 22-34 р. https://doi.org/10.1016/j.euromechsol.2016.08.011. (https://www.sciencedirect.com/science/article/pii/S0997753816301942)
Pagaimo, J., Magalhães, H., Costa, J. N., Ambrósio, J. (2020). Derailment study of railway cargo vehicles using a response surface methodology. Vehicle System Dynamics, 60(1), 309–334 р. https://doi.org/10.1080/00423114.2020.1815810
Bragança, C., Neto, J., Pinto, N., Montenegro, P. A., Ribeiro, D., Carvalho, H., Calçada, R. (2021). Calibration and validation of a freight wagon dynamic model in operating conditions based on limited experimental data. Vehicle System Dynamics, 60(9), 3024–3050р.
https://doi.org/10.1080/00423114.2021.1933091
Анофрієв В. Г., Донєв О. А., Мацюк А. С., Оберняк С. М., Аналіз виникнення несправностей та зносу елементів шворневої балки піввагона, Вісн. Дніпропетр. нац. унтузалізн. трансп. ім. акад. В. Лазаряна, 2012. Вип. 41. 7–10 с.
Національна транспортна стратегія України на період до 2030 року постанова КМУ 27.12. 2024 р. № 1550 https://zakon.rada.gov.ua/laws/show/1550-2024-%D0%BF#n17
Фомін О.В., Бурлуцький О.В., Фомін В.В. Аналіз експлуатаційних пошкоджень кузовів залізничних на піввагонів , Будівництво України. 2013.№ 3. 37-41с.
Фомін, О.В. Дослідження дефектів та пошкоджень несучих систем залізничних напіввагонів: монографія Київ : ДЕТУТ, 2014. С.299.
Конюхов А.Д. Корозія і надійність залізничної техніки. - М: Транспорт, 1995. 174 с.
Downloads
Published
Issue
Section
License
The authors who publish in this collection agree with the following terms:
• The authors reserve the right to authorship of their work and give the magazine the right to first publish this work under the terms of license CC BY-NC-ND 4.0 (with the Designation of Authorship - Non-Commercial - Without Derivatives 4.0 International), which allows others to freely distribute the published work with a mandatory reference to the authors of the original work and the first publication of the work in this magazine.
• Authors have the right to make independent extra-exclusive work agreements in the form in which they were published by this magazine (for example, posting work in an electronic repository of an institution or publishing as part of a monograph), provided that the link to the first publication of the work in this journal is maintained. .
• Journal policy allows and encourages the publication of manuscripts on the Internet (for example, in institutions' repositories or on personal websites), both before the publication of this manuscript and during its editorial work, as it contributes to the emergence of productive scientific discussion and positively affects the efficiency and dynamics of the citation of the published work (see The Effect of Open Access).
