REGARDING THE QUALITY OF ASSEMBLY OF THE SCREW CONNECTIONS OF THE MOUNTING ASSEMBLY OF BALL BEARINGS

Array

Authors

  • V. Lus’ O.M. Beketov National University of Urban Economy in Kharkiv

Keywords:

construction, dynamic reaction, dynamic parameters, vibration excitation, structural model, instability zone, frequency and amplitude of oscillations, nonlinear system, elastic characteristic, non-uniform stiffness, sensitivity of dynamic parameters.

Abstract

Application of method of vibrodiagnostics is based on the presence of cross-correlation dependences of dynamic descriptions of all knots from contact pressure in connection through the change of inflexibility of joints. The change of inflexibility of separate elements causes the change of the resulted inflexibility of knot, and at the same time and characteristic it to dynamic descriptions of the artificially created oscillation field: frequencies and amplitudes of resonance vibrations, indexes of damping, phase correlations.

There is a task of determination of method of control of the most responsible technological frame-clamping operations at making of such objects: quality of contact connections, ball-bearing knots, fixing of previous pull of ball-bearings and control of isotropicness, inflexibility and dissipative descriptions of the system of pendant of rotor at all stages of drafting, including in the functional state.

The primary objective of this work is research of question of influence of non-perfect resiliency and different inflexibility of the supporting bearings on the dynamic reaction of object at external oscillation excitation, determination of estimation of the different inflexibility bearings, determination of accordance of axial inflexibility of ball-bearings supports, them by a basic value. The dynamic model of knot and certain functions of influence of parameters of the system is considered on high-quality indexes.

The dynamic model of precision rotor system (PRS) is investigated.

Vibration tests at the stage of assembling the structure of the ORS showed that in the process of assembling the elements change the natural frequencies of the system and the quality factor of the oscillating circuits.

The resulted dependences allow giving an estimation degree of non-linearity of resilient description and, as a result, different inflexibility of bearings supports as a result of oscillation researches.

The sensitivity functions of the design parameters of the complex press-threaded connection in relation to the vibration dynamic parameters – frequencies and amplitudes of resonant oscillations – do not differ qualitatively from those obtained previously.

Author Biography

V. Lus’, O.M. Beketov National University of Urban Economy in Kharkiv

PhD, Associate Professor, Professor of the Department

References

1. Lus’, V.I. (2019). To determine the state of complex contact connections of precision rotary systems. Municipal economy of cities, 149, 29–34 [in Ukrainian]. DOI: https://doi.org/10.33042/2522-1809-2019-3-149-29-34
2. Lus’, V.I. (2020). To estimate the non-uniform stiffness of bearing supports along the width of the unstable zone of a nonlinear system. Municipal economy of cities, 156, 111–115 [in Ukrainian]. DOI: https://doi.org/10.33042/2522-1809-2020-3-156-111-115
3. Biderman, V.L. (1972). Applied theory of mechanical vibrations. Higher school, Moscow [in Russian].
4. Dzhashitov, V.E., Pankratov, V.M. & Golikov, A.V. (2010). General and applied gyroscope theory with the use of computer technologies. SSC RF JSC "Concern" Central research Institute "Electropribor", Saint Petersburg [in Russian].
5. Barulina, M.A. (2015). The frequency equation and natural frequencies of the vibrating elements of micromechanical gyroscopes based on the shift theory of Timoshenko. Nano- and Microsystem technology, 4, 21–31 [in Russian].
6. Barulina, M.A. (2015) Construction of the mass matrix of a three-dimensional finite element for modeling the dynamics of micromechanical inertial information sensors and their nodes. Mechatronics. Automation. Management, Vol. 16(5), 352–360 [in Russian].

Published

2021-06-29

How to Cite

Lus’, V. (2021). REGARDING THE QUALITY OF ASSEMBLY OF THE SCREW CONNECTIONS OF THE MOUNTING ASSEMBLY OF BALL BEARINGS: Array. Municipal Economy of Cities, 3(163), 12–15. Retrieved from https://khg.kname.edu.ua/index.php/khg/article/view/5775