PROSPECTIVE TECHNOLOGIES OF MAINTENANCE AND REPAIR OF THE CONTACT NETWORK ACCORDING TO THE STATE OF URBAN ELECTRIC TRANSPORT
DOI:
https://doi.org/10.33042/2522-1809-2022-6-173-16-22Keywords:
electric transport contact network, operation and diagnostics, interaction with current receivers, resource-saving technologiesAbstract
Maintenance technology is an algorithm for assigning measures to maintain the specified technical condition of TP and CM equipment during their operation. The operable state of TP and CM is achieved by performing tasks: predicting changes in parameters and strength; designation of parameter tolerance limits; determination of parameters and patterns of load changes; development of device failure models; collecting information about the current state of devices and analyzing the causes of failures; development of diagnostic tools and methods; selection and calculation of maintenance technology parameters; organization of maintenance and repair system works.
The process of technical maintenance and the time of KD can be optimized. Optimization criteria can be indicators of device readiness or minimization of time and material costs for TP and KM maintenance. The following indicators of the maintenance and repair system have been approved: average and specific duration, labor intensity, cost, availability and technical use coefficients.
Given the complex operating conditions of the CM and the fact that it actually has no redundancy, it is necessary to continuously monitor the reliability indicators of the system as a whole and its elements in particular. With the help of these indicators, it is possible to determine the most appropriate technologies, organization, periodicity and volume of preventive and repair work for the maintenance of KM and optimization of these works under the condition of economy.
New technologies for the operation of contact networks and the implementation of reliable and economical current removal on urban electric transport are proposed. Considered theoretical and practical issues of maintenance and repair technologies of the contact network by condition. The fundamental criteria of the state of the contact network and the quality of current collection are generalized. Experimental studies of the contact network were carried out and a method of assessing the quality of current removal and the condition of contact suspensions based on the dependence of contact pressure was proposed.
References
Analiz roboty hospodarstva elektryfikatsii ta elektropostachannia v 2011 rotsi. Kyiv : «Ukrzaliznytsia», holovne upravlinnia elektryfikatsii ta elektropostachannia. (2012). (in Ukrainian)
Analiz roboty hospodarstva elektropostachannia v 2015 rotsi. Kyiv : PAT «Ukrainska zaliznytsia», de-partament elektropostachannia, (2016). (in Ukrainian)
Vologin, V. A. (2006). Vzaimodeystvie tokopriemnikov i kontaktnoy seti. M : Intekst. (in Russian)
Domanskiy, V. T., & Pereverzjev, K. V. (2019). Kontseptsіya tekhnіchnogo obslugovuvannya pristroїv elektropostachannya zalіznits za stanom na bazі їkh dіagnostiki і monіtoringu. Ukraїnska zalіznitsya, 3(69), 9–13. (in Ukrainian)
Domanskiy, I. V. (2016). Osnovi energoefektivnostі elektrichnikh sistem z tyagovimi navantazhennyami: mo-nografіya. Kharkіv: TOV «Tsentr іnformatsії transportu Ukraїni». (in Ukrainian)
Kornienko, V. V., Kotelnikov, A. V., & Domanskiy, V. T. (2004). Elektrifikatsiya zheleznykh dorog. Mirovye tendentsii i perspektivy (Analiticheskiy obzor): monografiya. Kiev : Transport Ukrainy. (in Russian)
Pereverzev, K. V. (2019). Sovremennye metody i sredstva diagnostiki kontaktnykh setey elektrifitsirovannykh zheleznykh dorog. Ukraїnska zalіznitsya, 6(72), 23–27. (in Russian)
Stolbov, P. V. (2017). Vysokoskorostnaya spetsializirovannaya matrichnaya kamera s rasshirennym dinamicheskim diapazonom i szhatiem izobrazheniya. Materialy 14-oy mezhdunarodnoy konferentsii «Televidenie: peredacha i obrabotka izobrazheniy». pp. 54–57. (in Russian)
Shevyakov, S. M., Sirotinin, V. I., Safin, V. G, & Voronin, A. V. (2017). Videoizmeritelnye sistemy diagnostiki kontaktnoy seti. Yevraziya Vesti, 11, 23. (in Russian)
Demydov O., Liubarskyi B., Domanskyi V, Glebova M., Iakunin D., Tyshchenko A. (2018) Determination of optimal parameters of the pulse width modulation of the 4qs transducer for electriс rolling stock. Eastern-European Journal of Enterprise Technologies. Vol. 5, Issue 5 (95). P. 29–38. doi:https://doi.org/10.15587/1729-4061.2018.143789. (in English)
Domanskyi I., & Kozlova О. (2020). Development prospects of external power supply electrical networks of traction substations. Komunalne gospodarstvo mіst: nauk.-tekhn. zb., 1(154), 8–15. DOI: 10.33042/2522-1809-2020-1-154-8-15 (in English)
Kiessling, F., Puschmann, R., Schmieder, A., & Schneider, E. (2017). Contact Lines for Electric Railways:Planning, Design, Implementation, Maintenance, 3rd Edition. Wiley Publishers. (in English)
Sarnes, B. (2001). Izmeritelnaya sistema dlya opredeleniya polozheniya i iznosa kontaktnogo provoda. Elektrische bahnen. 12, 490–495. (in Russian)
Schmidt, H., & Schmieder A. (2005). Current collection for high-speed transport. Elektrische Bahnen, 4, 231–236. (in English)
Sohei Yamada, Toshihide Kishi, Hiroshi Yamamoto. (2016). Utilization of Data Obtained Using Power Equipment Monitoring System Equipped to Series E235 Rolling Stock, JR EAST Technical Review. 34. 33 – 36. (in English)
Khvorost M.V., Domanskyi I.V., Vasenko V.O. (2020). Resursozberihaiuchi tekhnolohii ekspluatatsii kontaktnoi merezhi za stanom dlia miskoho elektrotransportu. Svitlotekhnika ta elektroenerhetyka. 58(02), 3–9. DOI: 10.33042/2079-424X-2020-2-58-3-9. (in Ukrainian)
Information technology – digital compression and coding of continuous-tone still images – Requirements and guidelines. www.w3.org. Retrieved from https://www.w3.org /graphics/jpeg/itu-t81.pdf. (in English)
Downloads
Published
How to Cite
Issue
Section
License
The authors who publish in this collection agree with the following terms:
• The authors reserve the right to authorship of their work and give the magazine the right to first publish this work under the terms of license CC BY-NC-ND 4.0 (with the Designation of Authorship - Non-Commercial - Without Derivatives 4.0 International), which allows others to freely distribute the published work with a mandatory reference to the authors of the original work and the first publication of the work in this magazine.
• Authors have the right to make independent extra-exclusive work agreements in the form in which they were published by this magazine (for example, posting work in an electronic repository of an institution or publishing as part of a monograph), provided that the link to the first publication of the work in this journal is maintained. .
• Journal policy allows and encourages the publication of manuscripts on the Internet (for example, in institutions' repositories or on personal websites), both before the publication of this manuscript and during its editorial work, as it contributes to the emergence of productive scientific discussion and positively affects the efficiency and dynamics of the citation of the published work (see The Effect of Open Access).