IMPROVEMENT OF TECHNOLOGICAL PROCESSES FOR INSTALLING ANCHOR BOLTS ON ACRYLIC COMPOSITIONS DURING THE INSTALLATION AND ASSEMBLY OF EQUIPMENT AND PRODUCTION LINES

Authors

  • N. Zolotova O.M. Beketov National University of Urban Economy in Kharkiv
  • O. Suprun O.M. Beketov National University of Urban Economy in Kharkiv

DOI:

https://doi.org/10.33042/2522-1809-2024-3-184-124-128

Keywords:

acrylic composition, anchor bolt, technological equipment, concrete, well, compressor, perforator, foundation

Abstract

The article discusses and improves the technological processes of installing anchor bolts on acrylic compositions during the installation of technological equipment at industrial enterprises in Ukraine, the optimal acrylic compositions developed at the O.M. Beketov National University of Urban Economy in Kharkiv and shows the relevance of using such compounds.

Author Biographies

N. Zolotova, O.M. Beketov National University of Urban Economy in Kharkiv

Candidate of Technical Sciences, Associate Professor at the Department of Technology and Organisation of Construction Production

O. Suprun, O.M. Beketov National University of Urban Economy in Kharkiv

Candidate of Technical Sciences, Senior Lecturer at the Department of Technology and Organisation of Construction Production

References

Zolotov S.M. Influence of the properties of the adhesive layer on the stress-strain state of the joint during adhesive anchoring of steel rods in concrete / S. M. Zolotov, O. M. Pustovoitova, L. V. Trykoz, S. M. Kamchatna, S. A. Savisko // Collection of scientific works of the Ukrainian State University of Railway Transport. 2023 - Issue 205 - P. 51-60.

Shutenko L.M. Fastening of technological equipment and metal structures to foundations and labour safety: monograph / L.M. Shutenko, M.S. Zolotov, V.O. Sklyarov, Y.O. Serikov et al: KHNAMG, 2008. - 285 с.

Design and calculation of steel-iron connections with concrete: textbook / S.M. Zolotov, O.M. Pustovoitova, P.M. Firsov ; Kharkiv National University of Municipal Economy named after A.N. Beketov - Kharkiv: KhNUMH named after A.M. Beketov, 2023. 187 p.

Zolotova N. M. Advantages of using chemical anchors on acrylic compositions for fastening technological equipment / N.M. Zolotova, V.O. Sklyarov, O.Y. Suprun // Collection of scientific works of UkrDUZT, Issue 183 - Kharkiv, 2019.

Suprun О.Y. Zolotova N.M., Short-term strength of anchor screws on modified acrylic adhesives / V.O. Sklyarov, N.M. Zolotova, O.Y. Suprun // IOP Conference Series: Materials Science and Engineering: 2019. - Vol. 708(1). – 6

Barnat J. The Shear Strength of Epoxy Adhesive Used for Chemical Anchors / J. Barnat, M. Bajer // Advanced Materials Research. ‒ 2015. ‒ Volume 1122. ‒ Pp. 278‒281.

Cattaneo S. Adhesive anchors in high performance concrete / S. Cattaneo, G. Muciaccia // Materials and Structures. ‒ 2016. ‒ Volume 49. ‒ Issue 7. ‒ Pp. 2689–2700.

Elfgren L. Anchor bolts in concrete structures / L. Elfgren, R. Eligehausen, J. G. Rots // Materials and Structures, 2001. ‒ Volume 34. ‒ No 242. ‒ Рp. 451‒457.

Gesoğlu M. Modeling and analysis of the shear capacity of adhesive anchors post-installed into uncracked concrete / M. Gesoğlu, E. M. Güneyisi, E. Güneyisi // Composites Part B : Engineering. ‒ 2014. ‒ Volume 60. ‒ Issue null. ‒ 716‒724.

Pocius A. V. Adhesion and adhesives technology : An Introduction / A. V. Pocius. − 2nd ed. – Munich : Hanser gardner publications, 2002. − 319 p.

Yilmaz S. Tensile behavior of post-installed chemical anchors embedded to low strength concrete / S. Yilmaz, M. Ali Özen, Ya. Yardim // Construction and Building Materials, 2013. ‒ Volume 47. ‒ Issue null. ‒ P. 861‒866.

Potsius A. Glues, adhesion, gluing technology / A. Potsius ; translated from English by Y. A. Garashchenko ; ed. by G. V. Komarov. - K.-Pb. : Profession, 2016. - 384 с.

Technology and organisation of work on the connection of building structures with acrylic compositions : monograph / N. M. Zolotova, V. O. Skliarov, O. Y. Suprun ; Kharkiv National University of Urban Economy named after A. M. Beketov - Kharkiv: KhNUMH named after A.M. Beketov, 2019. 136 p.

Zolotova N.M., Suprun O.Y. Modern technologies for applying acrylic composition to the surface of concrete for connecting building structures Scientific and technical collection "Municipal Economy of Cities" Vol. 1 No. 175 (2023): series: technical sciences and architecture.

Professional power tools. BOSH product catalogue. - 2012. - 416 p.

Downloads

Published

2024-06-07

How to Cite

Zolotova, N., & Suprun, O. (2024). IMPROVEMENT OF TECHNOLOGICAL PROCESSES FOR INSTALLING ANCHOR BOLTS ON ACRYLIC COMPOSITIONS DURING THE INSTALLATION AND ASSEMBLY OF EQUIPMENT AND PRODUCTION LINES. Municipal Economy of Cities, 3(184), 124–128. https://doi.org/10.33042/2522-1809-2024-3-184-124-128

Issue

Vol. 3 No. 184 (2024): Series: Engineering science and architecture

Section

статьи

License

The authors who publish in this collection agree with the following terms:
• The authors reserve the right to authorship of their work and give the magazine the right to first publish this work under the terms of license CC BY-NC-ND 4.0 (with the Designation of Authorship - Non-Commercial - Without Derivatives 4.0 International), which allows others to freely distribute the published work with a mandatory reference to the authors of the original work and the first publication of the work in this magazine.
• Authors have the right to make independent extra-exclusive work agreements in the form in which they were published by this magazine (for example, posting work in an electronic repository of an institution or publishing as part of a monograph), provided that the link to the first publication of the work in this journal is maintained. .
• Journal policy allows and encourages the publication of manuscripts on the Internet (for example, in institutions' repositories or on personal websites), both before the publication of this manuscript and during its editorial work, as it contributes to the emergence of productive scientific discussion and positively affects the efficiency and dynamics of the citation of the published work (see The Effect of Open Access).