METHODOLOGY FOR QUANTITATIVE ASSESSMENT OF THE FILAMENTOUS INDEX IN TECHNOLOGIES OF BIOLOGICAL WASTEWATER TREATMENT

Authors

  • V. Yurchenko O.M. Beketov National University of Urban Economy in Kharkiv
  • S. Tkachenko O.M. Beketov National University of Urban Economy in Kharkiv

DOI:

https://doi.org/10.33042/2522-1809-2024-4-185-54-59

Keywords:

activated sludge, sludge bulking, filamentous index, quantitative analysis, treatment efficiency

Abstract

For the quantitative control of the filamentous index in biological treatment facilities, a computerized methodology has been developed within the presented study. Its use enhances the reliability and techno-genic safety of operating biological treatment facilities. Problems related to filamentous microorganisms, which can hinder effective wastewater treatment, are considered. Sludge bulking occurs when the intensive growth of these microorganisms complicates the separation of activated sludge from treated wastewater, leading to various operational issues. The study emphasizes the importance of microscopic analysis in identifying and addressing problems associated with filamentous organisms. The use of microscopic analysis as a crucial tool for managing activated sludge issues is discussed. The classification system developed by D. Eikelboom, which identifies 21 types of filamentous organisms based on visual characteristics, is described in detail. The filamentous index, a key parameter for monitoring the quality of activated sludge, is examined in detail, along with methods to minimize subjective evaluation factors using computer technologies. The primary goal of the study is to develop a computerized methodology for the rapid quantitative determination of the filamentous index, and area of filamentous microorganisms in activated sludge. The ImageJ software was used for processing microphotographs of sludge, enabling precise measurements of geometric characteristics. The analysis includes processing images from Eikelboom's work to establish reference values for the filamentous index. Microsoft Excel software was used for theoretical calculations and statistical analysis of experimental data. The results of the research, which confirm the effectiveness of the proposed methodologies, are presented.

Author Biographies

V. Yurchenko, O.M. Beketov National University of Urban Economy in Kharkiv

Doctor of Technical Sciences, Full Professor, Professor at the Department of Urban Ecology Engineering

S. Tkachenko, O.M. Beketov National University of Urban Economy in Kharkiv

PhD Student at the Department of Urban Ecology Engineering

References

Wanner, J. (1994). Activated sludge bulking and foaming control. Technomic Pub.

Pasveer, A. (1969). Investigation on the control of filamentous bulking. Advances in water pollution research (с. 555–561). Elsevier. https://doi.org/10.1016/b978-0-08-012999-0.50066-6

Jiang, F., Zhao, Y. L., Chen, S. F., & Liang, R. (2011). Research on filamentous bulking in aerobic granular sludge. Advanced Materials Research, 356-360, 1267–1271. https://doi.org/10.4028/www.scientific.net/amr.356-360.1267

Martins, A. M. P., Pagilla, K., Heijnen, J. J., & van Loosdrecht, M. C. M. (2004). Filamentous bulking sludge—a critical review. Water Research, 38(4), 793–817. https://doi.org/10.1016/j.watres.2003.11.005

Amin, L., van der Steen, P., & López-Vázquez, C. M. (2022). Expanding the activated sludge model no.1 to describe filamentous bulking: The filamentous model. Journal of Water Process Engineering, 48, 102896. https://doi.org/10.1016/j.jwpe.2022.102896

Dinius, A., Kozanecka, Z. J., Hoffmann, K. P., & Krull, R. (2023). Intensification of bioprocesses with filamentous microorganisms. Physical Sciences Reviews. https://doi.org/10.1515/psr-2022-0112

Khristenko, A. M. (2022). Features of activated sludge bulking in membrane bioreactors. Scientific Bulletin of Civil Engineering, 107(1), 41–48. https://doi.org/10.29295/2311-7257-2022-107-1-41-48

Eikelboom, D. H. (1975). Filamentous organisms observed in activated sludge. Water Research, 9(4), 365–388. https://doi.org/10.1016/0043-1354(75)90182-7

Eikelboom, D. H. (2000). Process control of activated sludge plants by microscopic investigation. IWA Pub.

Chudoba, J., Grau, P., & Ottová, V. (1973). Control of activated-sludge filamentous bulking–II. Selection of microorganisms by means of a selector. Water Research, 7(10), 1389–1406. https://doi.org/10.1016/0043-1354(73)90113-9

Lou, I., & In Ieong, I. (2015). Modeling growth of filaments and floc formers in activated sludge flocs: Integrating the effects of kinetics and diffusion. Environmental Modeling & Assessment, 20(3), 225–237. https://doi.org/10.1007/s10666-015-9453-7

Martins, A. M. P., Karahan, Ö., & van Loosdrecht, M. C. M. (2011). Effect of polymeric substrate on sludge settleability. Water Research, 45(1), 263–273. https://doi.org/10.1016/j.watres.2010.07.055

Cenens, C. (2000). Modeling the competition between floc-forming and filamentous bacteria in activated sludge waste water treatment systemsâ II. A prototype mathematical model based on kinetic selection and filamentous backbone theory. Water Research, 34(9), 2535–2541. https://doi.org/10.1016/s0043-1354(99)00422-4

Filamentous bacteria. (2006). У Wastewater bacteria (с. 143–151). John Wiley & Sons, Inc. https://doi.org/10.1002/0471979910.ch15

Liao, J. (2003). Quantifying activated sludge bulking-causative filamentous bacteria using molecular methods [NCSU]. http://www.lib.ncsu.edu/theses/available/etd-01222003-102459/

Lawson, L. (2018). Microscopic investigation of filamentous microorganisms in activated sludge process for sewage treatment [Thesis, KTH, Skolan för kemi, bioteknologi och hälsa (CBH)]. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-231524

Eikelboom, D. H., & Geurkink, B. (2002). Filamentous micro-organisms observed in industrial activated sludge plants. Water Science and Technology, 46(1-2), 535–542. https://doi.org/10.2166/wst.2002.0531

Jenkins, D., Richard, M. G., & Daigger, G. T. (2003). Manual on the causes and control of activated sludge bulking, foaming, and other solids separation problems. CRC Press. https://doi.org/10.1201/9780203503157

Downloads

Published

2024-09-06

How to Cite

Yurchenko, V., & Tkachenko, S. (2024). METHODOLOGY FOR QUANTITATIVE ASSESSMENT OF THE FILAMENTOUS INDEX IN TECHNOLOGIES OF BIOLOGICAL WASTEWATER TREATMENT. Municipal Economy of Cities, 4(185), 54–59. https://doi.org/10.33042/2522-1809-2024-4-185-54-59

Issue

Vol. 4 No. 185 (2024): Series: Engineering science and architecture

Section

статьи

License

The authors who publish in this collection agree with the following terms:
• The authors reserve the right to authorship of their work and give the magazine the right to first publish this work under the terms of license CC BY-NC-ND 4.0 (with the Designation of Authorship - Non-Commercial - Without Derivatives 4.0 International), which allows others to freely distribute the published work with a mandatory reference to the authors of the original work and the first publication of the work in this magazine.
• Authors have the right to make independent extra-exclusive work agreements in the form in which they were published by this magazine (for example, posting work in an electronic repository of an institution or publishing as part of a monograph), provided that the link to the first publication of the work in this journal is maintained. .
• Journal policy allows and encourages the publication of manuscripts on the Internet (for example, in institutions' repositories or on personal websites), both before the publication of this manuscript and during its editorial work, as it contributes to the emergence of productive scientific discussion and positively affects the efficiency and dynamics of the citation of the published work (see The Effect of Open Access).