RESERVE CAPACITY OF LONGITUDINAL BEAM OF WAGON TRUCK UNDER THE ACTION OF UNIFORMLY DISTRIBUTED LOADING

Array

Authors

  • O. Kuznetzov O.M. Beketov National University of Urban Economy in Kharkiv
  • O. Rubanenko O.M. Beketov National University of Urban Economy in Kharkiv
  • O. Khrenov O.M. Beketov National University of Urban Economy in Kharkiv
  • E. Rafalskiy O.M. Beketov National University of Urban Economy in Kharkiv

Keywords:

resource saving, beam, bearing capacity, allowable stresses, limit state

Abstract

Priority directions and measures among the main branches of urban electric transport are resource saving in the subway transportation system during its operation. First of all, this problem must be solved by scientific support, that is, at the stage of designing parts and components of vehicles. One of the main tasks that are solved at the design stage is to increase the load-bearing capacity of the parts by analyzing their stress-strain state.The article is devoted to the calculation of the load capacity reserve of the longitudinal beam of the front subway trolley under the action of evenly distributed over the entire length of the load without taking into account the transverse forces. The priority of the research topic is substantiated, the purpose and tasks are formulated. Two approaches to the power calculation of the bearing capacity of the longitudinal beam are introduced: the calculation of the permissible stresses and the limit state. In both cases elastic models of beams are considered. In the case of calculation on the limit state, the mechanics of the occurrence of plastic hinges at the places of rigid fixing of the ends of the beam are first substantiated. The beam still retains its load capacity. With the further growth of the external load, the emergence of a plastic hinge is justified even in the middle of the beam with the simultaneous loss of the beam of the bearing capacity. To simulate the behavior of the beam according to its characteristics, including the stress and the degradation condition of its load capacity, the mathematical formulation of the problem of calculating the load capacity of the longitudinal beam when calculating the permissible stresses and the limit state without taking into account the transverse force. The load-bearing capacity of the longitudinal beam in the calculation of permissible stresses and the limit state is analyzed. The analysis of the obtained results allows us to judge the effectiveness of the proposed mathematical model as a whole. The obtained equations for the maximum allowable load when calculating the limit state and the allowable stresses allow us to reliably estimate the bearing capacity of the longitudinal beam in both cases. The increase in the bearing capacity of the beam in the case of calculation on the limit is three times. The conclusions about the adequacy of the analysis of the bearing capacity of the longitudinal beam bearing capacity were made.

Author Biographies

O. Kuznetzov, O.M. Beketov National University of Urban Economy in Kharkiv

Ph.D., Associate Professor

O. Rubanenko, O.M. Beketov National University of Urban Economy in Kharkiv

Ph.D., Associate Professor

O. Khrenov, O.M. Beketov National University of Urban Economy in Kharkiv

Ph.D., Associate Professor

E. Rafalskiy, O.M. Beketov National University of Urban Economy in Kharkiv

student

References

Kovalko, M. P & Denisiuk, S. P. (1998). Energy saving is a priority direction of Ukraine's state policy. In. А. К. Shidlovskiy (Ed.). Кyiv : UEZ, 506.

Volkov, B. N. (1991). Basics of resource saving in mechanical engineering. Lviv.: Politekhnika, 180.

Daleka, V. Kh. (2004). Resource management projects for urban electric transport. Project management and production development : collected papers. Luhansk : SNU іm. V. Dalia, 3(11), 34 – 40.

Skurikhin, V. І. (2011). Wear characteristics of parts on urban electric transport. Municipal economy of cities : collected papers. Kharkov : HNAGH, 97, 260 – 264.

Skurikhin, V. І. & Daleka, V. Kh. (2011). Features of wear of the elements of rolling stock of electric transport. Municipal economy of cities : collected papers. Kharkov : HNAGH, 101, 316 –321.

Skurikhin, V. І., Daleka, V. Kh. & Novikov, E. V. (2008). Optimization of the choice of wheel and motor blocks of subway cars. Municipal economy of cities : collected papers. Kharkov: HNAGH, 84, 276 – 282.

Shavkun, V. М. & Kulahin, V. Iu.(2006). Ways to increase the resource saving in the operation of rolling stock of electric transport. Second All-Ukrainian Scientific and Practical Conference "Problems and Prospects of Energy and Resource Saving of Housing and Communal Services". Alushta : AR Krym, 161 – 163.

Zubenko, D., Kuznetzov, A., Linkov, V., Petrenko, O. & Katsy, L. (2017). Development of methods for improving the energy and mechanical performance of the tram from the introduction of new tram crossings. Scientific Journal «Science Rise», 1/2(30), 15-20.

Kuznetzov, А & Zubenko, D. (2016). Designing intelligent systems management transport enterprises entropy approach. «EURЕKA: Physical Sciences and Engineering», Тallinn, 1(2), 1, 49-54.

Reinecke, M. & Jelinski, M. (2001). Anlagen zur Erkennenung unrunder Eisenbanhräder. ZEV+DIE Glasers Annalen, 125, 12, 551 – 555.

Judge, T. (2008). Remote monitoring of the technical state. Railway Age, 8, 33 – 36.

Bennet, S. (2000). Berlin S-Bahn Draws Up 10-Year Investment Plan. International Railway Journal, 40(7), 37 – 39.

Dodgson, M. (2000). The management of technological innovation : An international and strategic approach. Oxford : Oxford University Press, 272.

Kuznetzov, A., Skurikhin, V. & Shavkun, V. (2018). Investigation of resource- saving reserve of strength characteristics of longitudinal trolley of trolley wagon metropolitena. «EURЕKA: Physical Sciences and Engineering», 1(14), 1, 19 -28.

Shutenko, L. N, Zasyadko, N. А. & Chuprynin, A. A. (2007). Fundamentals of the theory of elasticity and plasticity: student manual. Kharkov : HNAGH, 135.

Pysarenko, H. S., Kvitka, О. L. & Umanskyi, Е. S. (1993). Material resistance: textbook. In H. S. Pysarenko (Ed.). Кyiv : High school, 655.

Bazhenov, V. A., Perelmuter, A. V. & Shyshov, O. V. (2009). Construction mechanics. Computer technology : textbook. Кyiv : Каrаvеlа, 696.

Downloads

Published

2020-04-03

How to Cite

Kuznetzov, O., Rubanenko, O., Khrenov, O., & Rafalskiy, E. (2020). RESERVE CAPACITY OF LONGITUDINAL BEAM OF WAGON TRUCK UNDER THE ACTION OF UNIFORMLY DISTRIBUTED LOADING: Array. Municipal Economy of Cities, 1(154), 50–56. Retrieved from https://khg.kname.edu.ua/index.php/khg/article/view/5531

Issue

Vol. 1 No. 154 (2020): Series: Engineering science and architecture

Section

статьи

License

The authors who publish in this collection agree with the following terms:
• The authors reserve the right to authorship of their work and give the magazine the right to first publish this work under the terms of license CC BY-NC-ND 4.0 (with the Designation of Authorship - Non-Commercial - Without Derivatives 4.0 International), which allows others to freely distribute the published work with a mandatory reference to the authors of the original work and the first publication of the work in this magazine.
• Authors have the right to make independent extra-exclusive work agreements in the form in which they were published by this magazine (for example, posting work in an electronic repository of an institution or publishing as part of a monograph), provided that the link to the first publication of the work in this journal is maintained. .
• Journal policy allows and encourages the publication of manuscripts on the Internet (for example, in institutions' repositories or on personal websites), both before the publication of this manuscript and during its editorial work, as it contributes to the emergence of productive scientific discussion and positively affects the efficiency and dynamics of the citation of the published work (see The Effect of Open Access).