SEDIMENTATION IN HYDROELECTRIC POWER TURBINES
DOI:
https://doi.org/10.33042/2522-1809-2024-4-185-147-152Keywords:
hydroelectric turbine, sedimentation erosion, computational fluid dynamics, fluid-structure interactionAbstract
The primary cause of erosive wear and energy loss is friction, and reportedly, one-third of the world’s energy resources go to overcome friction by several methods. The presence of deposits in water is a common problem in mountainous regions and some Ukrainian hydroelectric power stations. Hydro turbines face serious issues related to erosion from deposits during operation. Erosive wear occurs due to the impact of solid particles against a solid surface. The current environment contains particles whose velocity is sufficient to damage metal surfaces.
Various researchers have conducted numerous studies to minimise the effect of deposit erosion in multiple locations of Francis turbine components (FT). For this purpose, they performed field investigations, experimental measurements, empirical modelling, computational fluid dynamics (CFD) work, and other methods. Various empirical models have been used to describe erosive wear in terms of material and fluid properties. They established that, for ductile materials, maximum erosion occurs at an impact angle of 30°, whereas for brittle materials, it occurs in the range of 80–90°.
In the literature, various experimental methods are available to quantitatively assess slurry erosion, such as the rotating disk apparatus (RDA), slurry tank testing, jet erosion testing, and rotating drum testing.
Due to manufacturing technologies used in mechanical processing processes, the exposed surface has a certain absolute roughness that increases during machine operation due to abrasion or erosion. Therefore, surface texture leads to increased energy efficiency losses during operation.
Technological advancements have facilitated the widespread use of computational tools to address deposit erosion issues. In recent decades, numerical methodology has been a widely used and effective tool, yielding tangible and reliable results.
This study examines potential methods for detecting and reducing deposits. This type of erosion depends on flow characteristics, surface properties, and properties of the eroding material. The article provides comprehensive information on sedimentation (deposits) causing wear in hydraulic turbines.
References
Rao, P.; Buckley, D.H. Predictive capability of long-term cavitation and liquid impingement erosion models. Wear 1984, 94, 259–274.
http://doi.org/10.1016/0043-1648(84)90131-5
Rajkarnikar, B.; Neopane, H.P.; Thapa, B.S. Development of rotating disc apparatus for test of sediment-induced erosion in francis runner blades. Wear 2013, 306, 119–125. http://doi.org/10.1016/j.wear.2013.07.011
Chitrakar, S.; Neopane, H.P.; Dahlhaug, O.G. Study of the simultaneous effects of secondary flow and sediment erosion in Francis turbines. Renew. Energy 2016, 97, 881–891. http://doi.org/10.1016/j.renene.2016.06.007
Ghenaiet, A. Prediction of Erosion Induced By Solid Particles in a Water Turbine. In Proceedings of the 11th European Conference Turbomachinery Fluids Daynamics and Thermo-dynamics, Madrid, Spain, 23–27 March 2015; pp. 1–13.
Koirala, R.; Prasad, H.; Shrestha, O.; Zhu, B.; Thapa, B. Selection of guide vane pro file for erosion handling in Francis turbines. Renew. Energy 2017, 112, 328–336. http://doi.org/10.1016/j.renene.2017.05.033
Javaheri, V.; Portera, D.; Kuokkalab, V.-T. Slurry erosion of steel—Review of tests, mechanisms and materials. Wear 2018, 408–409, 248–273. http://doi.org/10.1016/j.wear.2018.05.010
Noon, A.A.; Kim, M.-H. Erosion wear on Francis turbine components due to sediment flow. Wear 2017, 378–379, 126–135. http://doi.org/10.1016/j.wear.2017.02.040
Eltvik, M. Sediment Erosion in Francis Turbines. Ph.D. Thesis, NTNU, Trondheim, Norway, 2013.
Alveyro, L.; Jose, F.; Aida, S. Performance improvement of a 500-kW Francis turbine based on CFD. Renew. Energy 2016, 96, 977–992.
Aponte, R.; Teran, L.; Ladino, J.; Larrahondo, F.; Coronado, J.; Rodríguez, S. Computational study of the particle size effect on a jet erosion wear device. Wear 2017, 374–375, 97–103. http://doi.org/10.1016/j.wear.2016.11.042
Kocak, E.; Karaaslan, S.; Yucel, N.; Arundas, F. A Numerical Case Study: Bovet Approach to Design a Francis Turbine Runner. Energy Procedia 2017, 111, 885–894. http://doi.org/10.1016/j.egypro.2017.03.251
Liu, X.; Luo, Y.; Karney, B.W.; Wang, W. A selected literature review of efficiency improvements in hydraulic turbines. Renew. Sustain. Energy Rev. 2015, 51, 18–28. http://doi.org/10.1016/j.rser.2015.06.023
Maruzewski, P.; Hasmatuchi, V.; Mombelli, H.-P.; Burggraeve, D.; Iosfin, J.; Finnegan, P.; Avellan, F. Surface Roughness Impact on Francis Turbine Performances and Prediction of Efficiency Step Up. Int. J. Fluid Mach. Syst. 2009, 2, 353–362. http://doi.org/10.5293/IJFMS.2009.2.4.353
Khanal, K.; Neopane, H.P.; Rai, S.; Thapa, M.; Bhatt, S.; Shrestha, R. A methodology for designing Francis runner blade to find minimum sediment erosion using CFD. Renew. Energy 2016, 87, 307–316. http://doi.org/10.1016/j.renene.2015.10.023
Chitrakar, S. FSI Analysis of Francis Turbines Exposed to Sediment Erosion FSI Analysis of Francis Turbines Exposed to Sediment Erosion. Master’s Thesis, KTH, Stockholm, Sweden, July 2013.
Müller, A.; Favrel, A.; Landry, C.; Avellan, F. Fluid–structure interaction mechanisms leading to dangerous power swings in Francis turbines at full load. J. Fluids Struct. 2017, 69, 56–71. http://doi.org/10.1016/j.jfluidstructs.2016.11.018
Downloads
Published
How to Cite
Issue
Section
License
The authors who publish in this collection agree with the following terms:
• The authors reserve the right to authorship of their work and give the magazine the right to first publish this work under the terms of license CC BY-NC-ND 4.0 (with the Designation of Authorship - Non-Commercial - Without Derivatives 4.0 International), which allows others to freely distribute the published work with a mandatory reference to the authors of the original work and the first publication of the work in this magazine.
• Authors have the right to make independent extra-exclusive work agreements in the form in which they were published by this magazine (for example, posting work in an electronic repository of an institution or publishing as part of a monograph), provided that the link to the first publication of the work in this journal is maintained. .
• Journal policy allows and encourages the publication of manuscripts on the Internet (for example, in institutions' repositories or on personal websites), both before the publication of this manuscript and during its editorial work, as it contributes to the emergence of productive scientific discussion and positively affects the efficiency and dynamics of the citation of the published work (see The Effect of Open Access).
